Sitemap
Home
Opinions
Press Releases
Link Categories
J-EAST
TOP
>
J-EAST
>
List of Journal Titles (N)
> Nippon Chuzo Kogakkai Zenkoku Koen Taikai Koen Gaiyoshu
List of Jounal Titles
A to Z index of Journal Title. Choose a letter.
A
/
B
/
C
/
D
/
E
/
F
/
G
/
H
/
I
/
J
/
K
/
L
/
M
/
N
/
O
/
P
/
Q
/
R
/
S
/
T
/
U
/
V
/
W
/
X
/
Y
/
Z
/
0
/
1
/
2
/
3
/
4
/
5
/
6
/
7
/
8
/
9
Nippon Chuzo Kogakkai Zenkoku Koen Taikai Koen Gaiyoshu
134th
Analyses of solidification behavior of Al base multi component alloys.
Analyses of fluidity, solidification and defect prediction in Al castings by a finite element method.
Analyses of casting defects in copper alloy castings by fluidity and solidification simulation.
An application of analyses of fluidity and solidification to copper alloy castings of complicated shapes.
Prediction of solidification structure with instantaneous nucleation.
A high speed program for fluidity and solidification analyses.
Analyses of fluidity in a sleeve of a diecast machine.
Simulation of fluidity of molten metal for a SSM process.
Statistical analyses of characteristics of green sand molds.
Water absorbing and water retaining capacities of oilitec sand.
Effects of the green sand properties on moldability of green sand molds.
Calcium zirconate molds for titanium casting and binders.
Optimum design of sand mold squeeze casting with a stepped plunger.
Analyses of behavior of stress distribution in molding sand for fluidized pressure molding.
Variation factors for a lost pattern casting process.
Hot permeability of mold wash for lost pattern molds.
Behavior of pressure and volume of thermal decomposed gas in a lost pattern casting method.
Effects of grain properties on oscillating fluidization in a lost pattern casting method.
A casting model made by laser lithography in which optical fiber to transmit ultraviolet ray.
Surface roughness of castings with a core made by laser sintering and lamination molding process.
Relationships between green sand molding conditions and pin hole defects in nodular graphite cast iron casting.
Growth behavior of cast iron with respect to heating atmosphere at temperatures below A1 transformation temperature.
Effects of bath properties on corrosion of high nitrogen containing austenitic corrosion resistant cast steel in molten zinc.
Fatigue strength characteristics of aluminum half-solidified material.
Effect of microstructure on mechanical property in semi-solid squeeze casting of eutectic Al-Si alloy.
Microstructure of semi-molten pressure casting Al-7%Si-3%Cu alloy to which manganese and iron are added with different quantities.
Preparation of Al alloy material for semi-molten process using the inclinrd cooling plate.
Preparation of Al alloy plate by downward melt drag method.
Preparation and characterization of porous copper with unidirectional polycore structure.
Effect of heat treatment on damping capacity of Zn-3-28%Al alloy.
Preparation of layered rapid solidification material by rotating liquid spinning process.
Strength characteristic of AZ81 magnesium alloy castings by TIG welding.
Weldability of copper alloy castings and wrought copper alloy by laser welding.
Filling of foreign matter in Cu-Bi-Sn alloy porous body prepared by the de-melt processing and the heat transfer characteristic.
Mechanical property and acoustic characteristic of Cu-Sn alloy.
Notch fatigue characteristics of Al-Si-Cu alloy for casting.
Elucidation of bubble generation mechanism in aluminum foam.
Basic research on solidification phenomenon analysis by applying and providing rod style ultrasonic wave measuring method.
Laser cladding for AC4CH.
Morphological change of primary crystal by the ultrasonic vibration of AlSi alloy held isothermally in solid-liquid coexistence zone.
Estimation of content of trace elements in aluminum alloy based on cooling curve.
Effect of Na on fluidity and solidification morphology of Al-Si alloy.
Density of aluminum die castings with different casting pressure.
Some examination on the cast coating condition of cylindric alumina ceramics by cast iron.
Melting of cast iron and mild steel rod in molten cast iron.
Formation of overlay on thick iron casting by Ni powder and low-melting-point Ni alloy powder.
Effect of composition of active metalbrazing filler metal on the junction of alumina and nodular graphite cast iron.
Effects of alloying elements on mechanical properties of high carbon containing high speed tool type alloy.
High temperature oxidation of high chromium containing cast iron.
Anisotropy of compressive strength at high temperature of high chromium containing white cast iron.
Transformation of iron matrix in Fe-25%Cr-C-B casting alloys.
Effects of Co concentrations on oxidation resistance of multi component white cast iron.
Effects of Ti and Bi on distance of graphite in directional solidified Ni-C alloys.
Controls of graphitic structure of thick wall castings of high Si and Mo-FCD.
Structure of unidirectional solidified Fe Mo-C alloys and measurements of degrees of interface subcooling of eutectic carbide.
Coke of a low sulfur content for melting ductile cast iron.
Remelting of nodular graphite cast iron by a levitation melting unit.
Melting of machining scrap of cast iron in a rotary furnace.
An application of a regenerative burner system to a rotary furnace.
Secular changes of graphite shapes and of cooling curves in cast iron.
Mold filling characteristics and material structure of partially-solidified cast iron.
Evaluation of characteristics of composite filters for treating molten cast iron.
Effects of combinations and amounts of alloying elements on gradient structure of graphitic for an improved in-mold process.
A consideration on inoculation effects to cast iron.
Effects of additions of rare earth elements on chilling tendency and shrinkage defects of nodular graphite cast iron.
Observation of oxide formed on surface of molten cast iron added with mish metal.
Relationship between stabilization of grain size index and penetration.
Analyses of fluidity and solidification of composite casting of an iron ball.
Basic examination of an extraction method of shape characteristics according to surface distance.
Particle size distribution in materials.
Effect of graphitic structure on gear rolling formability of nodular graphite cast iron.
Effect of matrix structure on gear rolling formability of nodular graphite cast iron.
Punching of nodular graphite cast iron by the press.
Structure and mechanical property of wrought nodular graphite cast iron.
Effect of material microstructure on the austemper process by current-passing heating.
Development of flame hardening cast iron material for press mold.
Effect of solidification rate on coefficient of thermal expansion of low thermal expansion cast steel.
Laser hardfacing of chromium base alloy.
Effect of casting surface roughness and shot blasting on the strength characteristic of nodular graphite cast iron.
Effect of PVD treatment on wear characteristic of cast iron.
Evaluation of erosive wear lifetime of steel material.
Effect of dispersion rate of ceramic paricle on friction and wear characteristics of ceramic dispersion cast iron brake block.
Water embrittlement characteristics of austempered nodular graphite cast iron.
Effect of heat treatment on notch fatigue strength of FCD400.
Effect of outside notch on the static strength and fatigue strength of austempered nodular graphite cast iron.
Matrix styructure, fatigue strength, and crack growth characteristics of nodular graphite cast iron.
Effect of solidification rate on the fatigue strength of ferritic spheroidal graphite cast iron.
Appearance of fatigue crack in ferritic spheroidal graphite cast iron and effect of solidification rate on its propagation characteristics.
Fatigue property of TIG welded nodular graphite cast iron.
Effect of Mn content on the toughness of specially austempered nodular graphite cast iron.
Structure and mechanical property of P-B cast iron.
Effect of P, S, Mn and Ti on the mechanical property of cast iron.
Effect of zinc on the structure and mechanical property of cast iron.
Effect of cooling speed on the mechanical property of low alloy nodular graphite cast iron.
Interface control of copper in the cast junction by molten Al alloy.
Partially making composite of slurry formed by alternating magnetic field.
On the shape of impregnation front in the pressurization impregnation method.
Investigation of castability of dispersion hardened aluminum alloy composite material.
Refinement of Al2O3 particle formed by in situ reaction.
Dispersion of alumina particle in solder alloy.
Effect of interfacial structure on the soundness of friction welded joint of Al-Si-Cu-Mg alloy casting and Al-Cu Alloy base composite material.
Making the composite by dispersing the ceramic particle in the cast iron by compocasting method.
Cast technique of the Buddha Statue in Nara.
Cast and solidification in the space.
Looking back my 60 years casting life.
How to make the thin wall castings by diecasting method.
Education for bringing up the creative persons.
Integration of casting and design in the interior.
Integration of exhaust system cast parts.
Precision casting technology by lost plastic method using the gypsum mold.
Relationship between defect formation and sleeve packing fraction and injection speed of diecasting.
Study on function enhancement and making composite of thin wall high strength cast iron.
Metal matrix composite manufacturing process using the casting.
Computer simulation of fluidity in casting process.
Importance of Educating and Cultivating Young persons.
Talent training in the Kimura group.
New transmission world develped by the digital Japanese.
Problem and countermeasure of foundry technique transmission.
How long does it continue the honeymoon between foundary and die maker ?
135th
Rolling of fire-retardant magnesium alloy.
Discussion on improvement in creep resistance of magnesium alloy.
Mechanical property of creep resistant magnesium alloy.
Corrosion behavior of Mg alloy in brine environment.
Effect of vibration application on solidification structure of magnesium alloy.
Strength of Al2O3 short fiber reinforced AC8A aluminum alloy and AZ91D magnesium alloy.
History of pioneer and castings learnt from the construction of Nirayama reverberatory furnace.
Production technique of Nanbu iron kettle.
Sand mold casting of fire-retardant magnesium alloy.
Technique and technology for realizing supersensitive goods.
Casting industry as a recycling industry.
Microstructure control of antifriction castings.
Slurry erosion of Al-Si casting alloy.
Analysis of collision angle dependence in erosive wear of steel material.
Evaluation of high chromium cast iron by centrifugal spreader type high-temperature erosion tester.
Effect of roll material on roll surface roughness in cold rolling.
Sliding wear of graphite crystallization type chromium white cast iron.
Effects of Chemical Composition and Heat-Treatment on Abrasion Wear Behavior of High Alloyed White Cast Iron.
Functional gradient iron based alloy in terms of antifriction made by addition of chromium carbide.
Effect of chemical composition and testing condition on the abrasion resistance of quenched and tempered high carbon high speed steel.
Effect of heat treatment condition on the abrasion resistance ofhigh carbon high speed steel.
Young modulus of high chromium cast iron.
Microstructure and friction/wear characteristic of P additive alloy cast iron brake block.
Frictional and wear characteristics of cast iron composite material and its effect on opposite material.
Development of wear resistant castings parts using the cemented carbide particle.
Microstructure and mechanical property of alumina short fiber/high chromium cast iron composite material.
High-temperature abrasion resistance of alumina short fiber reinforced high chromium cast iron.
Finite element method mesh automatic construction and fluidity solidification simulation.
Analysis of fluidity of diecastings for fan frame of small motor.
Evaluation of fluidity simulation in casting plan of multi-cavity mold.
Scale-up simulation of diecasting parts for automobile.
Fluidity simulation considering back pressure in the sand mold casting.
Determination of thermophysical property of mold for copper alloy castings by inverse analysis technique.
Prediction of solidification structure by CA-DFD using the serial nucleus setting.
Numerical analysis of hydrogen diffusion by dynamic sub-meshing.
Improvement in shrinkage cavity by fluidity and solidification simulation.
Fluidity/solidification analysis and deformation analysis of multiple cast waste.
Simulation of thermal distortion of aluminum diecastings.
Behavior in the sleeve of cold chamber diecasting of aluminum alloy molten metal and defect generation.
Density of aluminum diecastings produced in low cast pressure area.
Segregation of primary crystal Si of hyper-eutectic Al-Si alloy diecasting.
Effect of superspeed injection on the casting quality.
Oxidation mechanism of molten metal of ADC12 system alloy containing Zn and Mg.
Microstructure of semi-molten continuous casting ingot of AC4C aluminum alloy using the inclination cooling plate.
Rapid solidification of Ti-Fe alloy by cold crucible levitation melting.
Improvement of surface appearance of titanium precision castings.
Continuous casting of Cu-24.6%Sn alloy wire.
Filling behavior of molten metal in the sublimation pattern cast of Cu-Sn alloy.
Semi-molten pressurized solidification of grain-refined Cu-Sn-Zn alloy.
Molten metal removal process of Cu-Bi-Sn-Si alloy.
Iron-making by Tatara method Education through production based on the melting and casting experiment.
Concept of assistance to upbringing of casting engineers in public laboratories and its practice.
Present state of education-in-firm on casting technology.
Education of casting technology in mechanical engineering department, course situation of students, and reeducation of graduates.
High temperature deformation behavior of high-strength Al-Mg-Si alloy containing large amount of Si in the solidification process.
Effect of production process on high temperature fatigue strength of Al-Si-Cu alloy.
Mechanical property of AC4CH alloy castings to which the semi-solid and semi-molten process is applied.
Effect of microstructure on fatigue crack propagation characteristics of Al-7 %Si alloy castings.
Relationship between the quantification by image analysis method of microstructure morphology of Al-Si alloy and the mechanical property.
Strength characteristic of aluminum alloy castings and wrought aluminum alloy material by laser welding.
Change in plating structure by alloying of hot-dip Al-Zn plated steel sheet.
Bonding of alumina ceramics by hot pressing using Al thin film.
Preparation of partial composite from produced composite slurry by electromagnetic buoyancy.
Structure refinement of hypo-eutectic Al-Si alloy by electromagnetic vibration.
Structure refinement of Mg alloy by electromagnetic vibration.
Effect of C and Si contents on annealing behaviour of gas atomized cast iron powder.
Study on non-agitation granulation mechanism of primary crystals in Al-Si alloy.
Some conditions for refinement of Al2O3 formed in molten metal.
Matrix separation recycling technology of particle dispersion aluminum based composite materials.
Laser hardfacing of hastelloy on cast iron.
Formation of gradient graphitic structure in cast iron using mold interface reaction.
Formation of aluminum alloy layer on cast iron surface by thermal spraying diffusion method.
Melting of core in cast coating.
Reliability of bonding interface in composite high speed steel roll.
Effect of carbon contents on diffusion bonding performance of high nitrogen stainless steel to iron and steel materials.
Melting by diffusion in metallic materials.
Formation of surface hardening layer on cast iron by WC powder and low-melting Ni based alloy powder.
Surface modification in cast iron by high energy density heat source.
Wear mechanism on cast iron under constant direct current.
Effect of graphitic and matrix structures on high damping cast iron brake material.
Transformation and mechanical properties of iron matrix in Fe-25%Cr-C-B cast alloy.
High-temperature tensile properties of FCD-D.
Effect of outside notch on impact properties of nodular graphite cast iron.
Effect of plate thickness on fatigue crack propagation characteristics of nodular graphite cast iron.
Tensile properties of ADI rapidly austempered by direct electrical heating.
Effect of austenite matrix condition on nucleation and growth behavior of bainitic ferrite in ADI.
Effect of special heat treatment on toughness of austempered spheroidal graphite steel.
Microstructure and mechanical properties of rolled nodular graphite cast iron.
Effect of adhesion water on tensile properties of ferrite-austenite finely mixed nodular graphite cast iron.
StructureS of microspheral graphite in Ni-C-Bi alloy.
Effect of chemical composition on mechanical properties of high-strength cast steel materials.
Effect of Zn on mechanical properties of cast iron.
Effect of Mn on continuous cooling transformation behavior of simulated weld heat affected zone of flaky graphite cast iron.
Effect of residual stress on machinability of gray cast iron.
Study on gating system design for lost foam pattern cast.
Application of environment frendly cast process to lead-free copper alloy castings.
Effect of molten metal cleanliness on mechanical properties of nodular graphite cast iron from blast furnace molten pig iron.
Effect of Sb on solidification structure in large ductile cast iron.
Production of large FCDA castings.
Functional gradient nodular graphite cast iron produced by modificated in-mold process.
Effect of Cr on transformation characteristics of multialloyed white cast iron.
Structures and properties of hyper-eutectic cast iron manufactured by semi-solid agitation process.
Trial manufacture of functional gradient cast iron materials by semi-solid and centrifugal force method.
Relationship between graphite shape and matrix structures and high temperature oxidation chareristics of heat resistant cast iron.
Effect of cooling velocity and Ti contents on graphitic structure of cast iron.
Supercooling solidification in Fe-C alloy.
Effect of cooling velocity on graphite shape in Fe-Ni-C alloy.
Variation of cast iron structure and cooling curve with increase in aluminum contents.
Maps for selection of eutectic phase in Fe-M-C(M:Cr,V,Mo) system alloys.
Development of V containing spheroidal carbide cast iron.
Scaling resistant properties of V containing spheroidal carbide cast iron(contained by Ta and Nb).
Optimization of ladle insulation structure.
Investigation on green sand molding condition.
High temperature charachteristics of oolitics.
Effect of oolitic quantity on sand properties and casting quality.
Effect of mold materials on absorption of hydrogen by molten cast iron and formation of pin-hole.
Effect of binding agents on scratch hardness of lime mold and reactivity of mold with titanium.
Ultrasonic evaluation on remelting layer thickness of casting parts.
Lost plastic pattern casting process using pattern manufactured by laser lithography.
Mold fracture event in precision casting utilizing laser lithography model.
Effect of physical properties of filling materials on filling characteristics in vibration molding flask in evaporative pattern casting.
Noise analysis in shake out by wavelet transformation.
Trajectory analysis by simulation of dust in foundry.
Home
Opinions
Press Releases
Link Categories
J-EAST
Cafe Terrace
Topics
Hot Articles
Link to Us
Questionnaire
Contact Us
FAQ
Privacy Policy
Copyright Policy
Copyright (c) 2006-2007 Japan Science and Technology Agency. All Rights Reserved.