Science Links Japan | Nippon Kikai Gakkai Chugoku Shikoku Shibu Sokai, Koenkai Koen Ronbunshu

List of Jounal Titles

A to Z index of Journal Title. Choose a letter.

A/ B/ C/ D/ E/ F/ G/ H/ I/ J/ K/ L/ M/ N/ O/ P/ Q/ R/ S/ T/ U/ V/ W/ X/ Y/ Z/ 0/ 1/ 2/ 3/ 4/ 5/ 6/ 7/ 8/ 9

Nippon Kikai Gakkai Chugoku Shikoku Shibu Sokai, Koenkai Koen Ronbunshu

37th

Evaluation of Fatigue Crack Initiation Life in Pb-free Solder Joints of Surface-Mount Type.
Fatigue Micro Crack Behavior in Super Long Fatigue Life Range and Prediction of Fatigue Life in Spheroidal Graphite Cast Iron.
Study on Fatigue Crack Growth of Thin Plate and Film.
A Numerical Simulation of Cyclic Stress-Strain Response by using Finite Element Method and Fatigue Life Prediction in Notched Components.
Nonproportional fatigue of SUS316FR stainless steel using circular and butterfly strain paths.
Fretting Fatigue Properties of Inconel Alloy.
Discussion on Fatigue Design Code for Raiload Bogie Truck Frame.
A Study of Fatigue Damage (Push-Pull) Using X-Ray Residual Stress Measurements.
Effects of Heat Treatment on Fatigue Fracture Properties of Rolled Film Materials.
Crack Growth under Variable Amplitude Combined Bending and Torsion.
Development of Extensometer System for Ultra-High Temperature Testing and Fatigue Strength of Ceramics at Elevated Temperatures.
Effect of Microstructure on Dynamic Creep Deformation of Sintered Silicon Nitride Ceramics at Elevated Temperature.
Relation between Residual Stress and Fracture Toughness of Ceramics.
Characterization of Polarization and Impedance Response of WC Cermet-Sprayed Materials in NA2SO4 Solution.
Shear fracture property of C/C composites for various fabric structures of fiber.
Biaxial deformation property at high temperature of C/C composites under Biaxial Loadings.
High Temperature Creep Under Bend Loading in Si-Ti-C-O Ceramic Fiber Bonded Body.
Creep strength of Mod.9Cr-1Mo steel under biaxial stress states.
Rotating Bending Fatigue Strength Properties of Spheroidal Graphite Cast Iron at Elevated Temperatures.
A Discussion on Growth Mechanism of Creep Voids based on Size and Shape Measurement in Notched Components.
Fracture Mechanics Evaluation of the Fatigue Strength of Spot Welded Structures under Pressure.
Buckling Analysis for Facial Wrinkling by Bifurcation Mode Energy Method.
Micromechanical Modeling and Computational Simulation of Deformation Behavior of TRIP Steels.
Study on deformation of Single Component Atomic Systems under Tensile and Shear loading and unloading using Molecular Dynamics Simulation.
MD Simulation on Solid-Liquid Phase Change Process of Metal.
A Study of Strength of Spot-Welded Strap by Elasto-plastic Finite Element Method.
Efficient and Robust Distributed Processing of FEM on Inelastic Problem (Using Substructure Method).
Development of an interactive pre-processor of BFM using Java.
Numerical Simulation of Fracture Behavior in Ceramics Using Grain Boundary Elements.
Consideration on Accuracy of the Method of 3D Arbitrary Lines.
P-version FEM model as a possible powerful calculation method of TEHD problems.
Analytical Model for Reduction of Residual Stress of Welded Joint Using Vibration.
Numerical Calculation of Axisymmetric Stress Waves in Elastic Solid.
Analysis of Interaction between Two Rectangular and Square Inclusions.
Interaction of a Row of Ellipsoidal Inclusions in an Infinite Body under Asymmetric Uniaxial Tension.
Interaction among Elliptical Inclusions in an Infinite Plate Subjected to In-Plane Bending.
Analysis of Interaction between Interface Crack and Internal Crack using Singular Integral Equation of Body Force Method.
Tension of Infinite Solids Containing Various Arrays of Slant Cracks.
Stress Analysis of Disk with Concentrated In-Plane Load.
Effect of an Addition of Ag on the Discontinuous Deformation of Al-2%Zn Alloy.
Microscopic Observation of Plastic Deformation of Polycrystalline Iron.
Inverse Analysis of Slip Deformation of BCC Polycrystallines Metals.
Measurement of Biaxial Stress by an Electrodeposited Copper Foil with a Microcircular Hole (Effect of Modulus of Elasticity of the Material).
Measurement of Cyclic Pressure by Copper Foil with Micro Projections (Use of Cyclic Softening of Foil).
Ultrasonic Detection of Slit Depth.
A Theory of Elastic-Plastic-Viscoplastic Stress Waves of Solids in Uniaxial Strain State.
The Effect of Biaxial Stress on the Propagation of Mode I Surface Crack in 6061/Al2O3 Particle Reinforced Composites.
SCC Fracture Behavior of High-Strength Aluminum Alloy under Mixed-Mode I-II and I-III Loading.
Spring Constant of Clamped Part in Bolted Joint.
Stress Analysis of Bolted Joints Subjected to Impcat Tensile Load.
Investigation of Microscopic Surface Change and Effect of Anisotropy during Uniaxial Tension of Polycrystalline Aluminum.
Observation of Microscopic Deformation of Polycrystalline Aluminium by Laser Microscope.
The formation of Precipitate-Free Zones and Fatigue Strength of Al-5%Ag Alloys.
Effect of Cu Content and Aging Treatment on the Tensile-Properties of Al-Cu Alloys.
Preparation of Ni-Base Superalloys by MA-HIP Sintering Process and their Evaluation.
Scoring Resistance of Stainless Steel Spur Gears with Thermally Diffused Layer after Sn-Plating (Case of Grease Lubrication).
AE in Tooth Surface Failure Process of Ground Thermal Refining Gear.
Dynamic Behavior of Hybrid Structure Gears.
Study on Support System for 3D Plant Layout Design.
Biodegradation of Plastic Films in Various Environments.
Friction and Wear of Ni-P Alloy Plated Rollers with Fine Grain Dispersion (In High Vacuum).
Effects of Thermal Stress and Residual Stress on Surface Durability of Roller under a Sliding-Rolling Contact Condition.
Effect of Side Carburizing on Residual Stress of Case-Hardened Roller.
Influence of Roller Radius and Rotational Speed on Rippling Failure.
Study on Plastic Rolling Bearings (Difference in Frictional Characteristics According to Race Materials).
The proper work area from the viewpoint of muscular burden. When a work for moving object is to be done by left hand of operator who is cross-leggedly sitting.
Slicing Performance of Work Revorution Type Multi Wire-Saw.
Developing and Evaluating Cutting Stock Procedures based on Meta heuristics.
Construction of a Sensibility Model for Musical Timbre.
Dynamic Response of Stimulus in Myobrast Subjected to Tension.
An experimental investigation of supersonic turbulent shear layer.
Temperature Distribution on Occurred by Interaction Supersonic Jet.
Temperature Distribution on Inclined Wall Occurred by Interaction Supersonic Jet (Relation between Position of Local Maximum Temperature and Wave Phenomena).
Development of Small Arc-Plasma Wind Tunnel.
Numerical Analysis on the Structure of a Chemically Reacting Free Shear Layer with POD Method.
Effect of Shear Flow on Isotropic-Nematic Phase Transition.
Non-linear Behavior of Sheared Polymeric Liquid Crystals.
Study on Surface Phenomena and Hysterisis of Magnetic Fluids.
Behavior of Electro-rheological Fluid in Oscillatory Flow.
Effect of the Nozzle Shape on axisymetric Jet.
Structure of the wake behind a circular cylinder in a two-dimensional jet.
Picture Analysis of Aerodynamic Force and Moment Acting on Falling Pyramid.
Hydraulic oil flow with temperature gradient.
Development of Secondary Stream in Oscillatory Flow through Curved Pipes (Flow for High Womersley numbers).
Study on Characteristics of Flow Control Valve.
Flow Patterns and Pressure Drop in a Sinusoidal Wavy-Walled Tube in Transitional Regime.
Nemerical Study on Pulsatile Flow in a Two-dimensional Rough Wall Channel (The Relation between Vortex Pattern and Dynamic Characteristics in Groove).
Growth and Decay of Bathtub Vortex.
Analysis on the behavior of a rigid particle in a Burgers vortex.
Properties of the turbulence transition which develops from roughness rows.
The Flow over an Inclined Small Fence in a Turbulent Boundary Layer.
Relaminalization of a sink flow turbulent boundary layer.
Management of a Stronger Wall Jet by a Pair of Streamwise Vortices. A Comparison between Common-flow up and Common-flow down.
Turbulent Boundary Layer Distorted by a Pair of Streamwise Vortices Introduced from Free Stream.
The Effect of Tube Pitch on Heat Transfer around Two In-Line Cylinders in Pulsating Flow.
Approximation Equation of Theoretical Fin Efficiency of Serrated Fins.
Effect of Fin on Heat Transfer Around Tubes in Aligned Arrangement.
Effect of Tube Arrangement on Temperature Distribution of Fin Surface.
Coherent Structures of a Tube Bank Flow.
Friction Loss and Heat Transfer on Flows with Free Convection in Horizontal Rectangular Ducts (Effects of Prandtl Number).
Combined forced and free convection heat transfer in a vertical annulus.
Determination of Fluid Temperature in a Tube from Tube Surface Temperature by Inverse Heat Conduction Method.
Natural convection in closed air layers of horizontal parallel multi-plates.
Transient Natural Convection in a Rectangular Enclosure with Stepwise Heating and Cooling Vertical Walls.
Study on solidification of CO2 by using cold energy of Liquefied Natural Gas (5). Study on Dry Ice fluidized bed heat exchanger at Low Temperature.
A Prediction of Condensation of Natural Working Fluids on Horizontal Low Integral-Fin Tubes.
Heart Storage Characteristics of Pellet-Type Latent Heat Storage Material.
Behavior of Equal Density Oil-Water Mixtures in a Horizontal Capillary Tube.
Effect of pipe diameter on the behavior of gas slug in an inclined upward flow.
Flow and Heat Transfer Characteristics of The Surfactant Solution in a Curved Pipe.
Behavior of Wall Eddy Generated with a Circular Impinging Jet.
Numerical analysis on high speed melt spinning process.
Measurement of Ice Packing Factor of Ice Water Slurry.
Study on Measurement of Thermal Diffusivity of Transparent Material by Photoacoustic Method.
Development of Field Measurement System of Latent and Sensible Heat Transfer.
Combustion Characteristics of a Single Coal-Water Slurry Droplet in an Elevated Temperature Stream. The Influence of Gas in an Elevated Temperature Environment.
An Experimental Study on Group Combustion using an Array of Porous Cylinders.
Theoretical Study on Group Combustion Model Using an Array of Porous Cylinders.
Study on Burning Characteristics of Combustible Mixture with Rapid Compression.
Effects of Pressure, Temperature and Mixture strength on Burning Velocities for Methane- and Propane-Air Mixtures.
A study on Combustion of Heterogeneous Mixture Concentration Field in a Closed Vessel.
Characteristics of Atomization by Boiling of Subcooled Liquid in the Hole Nozzle.
Study on Droplet Characteristics of a Diesel Spray Impinging upon a Wall.
End-of-Injection Characterristics of D.I. Diesel Nozzle (Visual Study Using Ten-Times Model Nozzle).
Ignition and Combustion Characteristics of High Pressure Diesel Sprays.
Resonance Frequency Transition Phenomena in Inserted Pipe Type Mufflers with Flow.
Effects of Load on Engine Noise Components.
Exciting Moment Analysis of V-type Engine (14-Cylinder V-Type Engine).
Numerical Analysis of Contact Force Distribution at Piston Slap Timing in Diesel Engine.
Study of Influence Parameters at the Simultaneous and Areal Measurement of the Lubricating Oil Film Thickness and Temperature.
A Study on Ignition Delay in Dual Fuel Engine Ignited with Light Oil.
A Study on Reduction of NO Emission in Direct Injection Diesel Engine (Low NO Emission by Rich Combustion in Initial Stage).
Analysis of the Flow in Diesel Flame by using High Speed Photography and CFD Simulation.
Characteristics of Flow Field Generating by Interaction between Standing Oblique Shock Wave and Vortex.
Emission of a Propagating Shock Wave from an Open End of a Tube (Effects of Shock Mach Number on Mean Magnitude of Impulsive Wave).
On flows around a spherical condensed phase in its vapor due to interaction with a plane shock wave.
Interaction of Shock Wave with Boundary Layer in Supersonic Diffuser.
Task Assist Manipulator Using Rubber Artificial Muscle.
Trajectory Tracking Control of Two Degree of Freedom Flexible Manipulator.
Development of a Following-Type Force Display for the Virtual Catch Ball System.
Dynamics of Manipulator Tip Collision with its Environment. 3rd Report: Experiment with Three Link Manipulator and Evaluation of Equivalent Mass of Link.
Development of Planar-Type SoftActuator Using Silicon Rubber Balls.
A Study on Dynamics of Golf Swing (Effect of Elasticity of Shaft on Feeling of Swing).
Study of Jumping Robot. Development and Simulation of Jumping Robot.
A State Flow based mobile Robot for Indoor Arrangement.
A Study of Path Planning for Indoor Powered Wheelchairs.
A study on Behaviors to Pass Through a Door by Mobile Manipulator. Kinematic Analysis of Wrenching a Door.
Adaptive Flow Direction Control for Bi-directional Transport Management of Multiple AGVs.
Development of a Cell-style AGV Wireless Control System.
Development of Auto Guided Vehicle Control System with Several Guidance Method.
The Fuzzy Control of Omnidirectional Mobile Robot with Single Spherical-Wheel Assemblies based on Fuzzy Model.
On generating a preferable reference velocity for the powered wheelchair. A parametric Approach-giving the driver confortable mainpulation.
Mechanical Characteristics of TiNi Thin Films Sputter-Deposited at Various Pressure.
A New Micro SMA Thin Film Actuator Prestrained by Polyimide.
Fabrication of Micro Force Sensor and It's Application to Master Slave System.
A Trial Production of Micro Gas Valve Using Shape Memory Alloy Thin Film.
Fabrication and Characteristic of Multiple-Layer Micro Coil Using Anodic Oxidized Aluminum.
A Study for Vibration Control of a Suspended Load of Truck Crane Using H.INF. Control Based on LMI.
Vibration Suppression by Active Dynamic Vibration Absorber Based on LMS Algorithm.
Pneumatic Active Suspension of 1/4 Vehicle Models Using Sliding Mode Control.
On the Computing of Distance Between Fuzzy Sets.
On a theoretical consideration to the result of PID air press controls in a CE102 experimental equipment.
Temperature Control of Hot Water Supply System with multistage Boiler.
A note on a relationship between controlled revolutional characteristics of cyclic movement and the temperature of oil in the small-scaled HST.
Experimental Study on Orientations and Supply of Parts using Vibratory Bowl Feeder.
Modeling of the Flow of Granular Materials in Vibratory Feeder.
Control of Supply quantity in Vibratory Feeder.
Analysis of Impact Vibrating System Excited Arbitrary Periodic Force.
Analysis of Impact Vibrating System Excited Arbitrary Periodic Force (The Case Where Impact Body is Both Ends Supported Beam).
Developing Parameter Identification Methods for Vibration Systems using Meta-heuristics and Visual Analyzer.
Optimum Shape Design of Container for Liquid Transfer Considering suppression of Sloshing.
Optimal Parts Allocation for Easy Assemble and Disassemble of Bolts Fastened Bodies.
On optimization of movements in the small-sealed auto-movements in the small-sealed auto-moved vehicle controlled by GA's program.
An Integrated Production Control System in a Job-shop Type Production Environment.
A Study of Composite Dispatching Rule for Job Shop Scheduling.
Disassemblability and Recyclability Assessment for Spent Refrigerator.
An Educational Trial of Creative Production Applying Natural Energy.
Analising Technology of Scale Circuli Using Surface Profilometer (Effect of Stylus on Detected Accuracies).
Development of an Automatic Surface Inspection System.
Young's Modulas of Polysilicon Thin Film Made by Heating LPCVD Using Lamp.
Detection of Bending Profile of Endoscope using Strain Sensor.
Measurement of refractive index of mineral oil by laser interferometry.
Ship Interior Noise Analysis for Active Noise Control.
Correlation Analyses of Time-varying Signal using Wavelets.
Evaluation of Part Contribution of Sound Souce Using Characteristics of Auditory Sensation.
Efficient Reduction of Noise Based on Loundness.
Development of a Range Finder Using Dynamic Threshold Method for Characteristic Point Detection.
A New Method of 3-D Moving Image for the Virtual Catch Ball System.
Reconstructing 3D Scene Information from Multiple Image Using Dual Space.
Image Processing of Human Profile with Fourier Transform II.
Measurement of Human Characteristic of Subjective Contours to Develop an Algorithm of Pattern Recognition.
Recognition of 3-D Objects Using Local Information of Color.
Human Characteristic of Visual Search on Shape Perception.
Characteristic of vision and arm motion on human kinetic percepiton.
Measurement of Human Characteristic Between Vision and Arm Motion on Distance Perception.