|
List of Jounal Titles
A to Z index of Journal Title. Choose a letter.
Abstracts. Meeting of JIM
136th
- COMMEMORATIVELECTURE BY THE FIFTIETH GOLD MEDALIST OF THE JAPAN INSTITUTE OF METALS Coarsening in Solidification Processing
- Relaxation Phenomena and Molecular Dynamics in Polymeric Materials
- Gigahertz sound in liquid mercury generated and probed with ultrashort optical pulses
- Elastic properties of glass-forming materials in the GHz frequency range
- Glass transition of Zr-based BMG studied by low frequency shear modulus measurements
- Characteristics of dislocations and plastic deformation in fullerene crystals
- Mechanical properties of quasicrystals
- Internal Friction of Single-Quasicrystals of Al-Pd-Mn
- Elastic modulus and internal friction of decagonal Al72Ni12Co16 single quasicrystal at low temperature
- New microstructural refinement process of metallic materials by electromagnetic vibrations
- Damping capacity in martensite of shape memory alloys.
- Elastic properties of a multifunctional titanium alloy, "Gum Metal"
- Evaluation of elastic constants of lotus-type porous metals via effective-mean-field theory
- The effect of thermomechanical treatments on the internal friction of an Fe-28Mn-6Si-5Cr-0.53Nb-0.06C (mass%) alloy
- Anelastic relaxation due to intrinsic point defects in ordered compounds
- Hydrogen Permeation of Supported Thin Pd and Pd-25Ag Membranes
- Kinetic analysis of Ti-doped NaAlH4
- Mechanism of hydrogen sorption of M-N-H system composed of Mg(NH2)2 and LiH
- AN ANALYSIS OF FLOW MECHANISMS IN HIGH-TEMPERATURE CREEP AND SUPERPLASTICITY
- Effect of Heat Treatment on Microstructure and Creep Behavior of XD TiAl Alloys
- Solid solution hardening effect of Ir-Hf-Nb (Zr) alloys
- Preparation and characterization of platinum-iridium alloys through electroplating
- Effect of Ru additions on microstructure and phase stability of Udimet 720LI superalloy
- Advanced Disk Alloy Development
- Microstructure and Properties of Cr-Ti Alloys
- Deformation Twins and Failure due to Thermal-Mechanical Cycling in Superalloys
- Acoustic Emission Behavior of Mg during Recovery Process at Room Temperature
- An Investigation on Microstructure of a Heat Resistant Magnesium Alloy Prepared by Friction Stir Welding
- Composites of 14H Phase in Magnesium Alloys by Squeeze Casting
- 3DAP Characterization of Nanoscale Precipitates in Age-hardened Mg-Ca-Zn alloy
- The effect of oxygen partial pressure on the magnetoresistance of Co(-Pt)-ITO thin films
- GHz range electromagnetic wave absorbers made of amorphous carbon based magnetic nanocomposites
- High coercivity in melt-spun SmCo4.7Snx alloys
- Structure and Magnetic Properties of Oriented Fe-Pt-(Cu) Nanoparticles
- Plane-strain compression of Ni/Ni3Al two-phase alloy
- Catalytic properties of Ni3Al foils for methanol decomposition
- Growth Process of the .BETA.-FeSi2 epitaxial film on Si(111) by MBE
- Ultrafine Grain Formation in Aluminum Alloy 2219 during ECAE
- Fine-Grained Formation in 7475 Al Alloy during Hot Severe Plastic Forging
- Evidences of the Dependence of Glass Forming-ability on the Hydrostatic Pressure during Casting in Zr-based Alloys
- Influence of oxygen on the crystallization behavior of Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 metallic glass
- Effect of Tantalum on Corrosion Resistance of Ni-Based Glassy Alloys at High Temperature
- Structure and devitrification of rapidly-solidified Fe-Pt-B alloy
- Ultra-low glass transition in Ce-based bulk metallic glasses
- Mechanical and Magnetic Properties of Fe-Nd-Al Amorphous Alloys
- Viscous Flow Behavior of New Ti-based Bulk Glassy Alloys
- Glass-forming ability and mechanical properties of Ni-rich Ni-Pd-P bulk glassy alloys
- Investigation of Ti-Fe-Co bulk alloys with high strength and enhanced ductility
- Highly Segmented Thermal Barrier Coatings Sprayed from Different Powder Feedstock
- Oxidation and Hot Corrosion of SiC Materials in Alkaline Melts
- Rapid determination of isothermal NiGaFe ternary phase diagram by diffusion couple technique
- Thermodynamic Calculation of Phase Diagram in the Cu-Ti-Zn System
- Effect of Ion Irradiation on Coherency of Precipitates in Cu-Co Alloy
- Effect of Cr concentration and Al addition on the thermal embrittlement of high Cr ODS steels
- Radial distribution analysis of amorphous SiC induced by ion beam bombardment
- TEM investigation on the irradiation effects of Xe ions on Fe4N iron nitride
- Microstructures of MgB2 Superconducting Films Fabricated by in situ EB and ex situ PLD Techniques
- Effect of nano-SiC doping on microstructure of in situ powder-in-tube MgB2 tape
- Magnetic properties and magnetostructural phase transitions in Fe-doped Ni2MnGa alloys
- Evidence for volume effect of ferroelectric aging by in-situ domain observation
- Evolution of VN Precipitate in Fe-Mn-Si-Cr Shape Memory Alloy
- Microstructure and shape memory effect in Ti-Nb-Pd alloys
- Transformation and shape memory behavior of sputter-deposited Ti-(Ni,Pt) alloy thin films
- Thermo-Mechanical Response in Ni-rich TiNi Foils Produced by Ultrafine Laminates Method
- Abnormal reverse transformation behavior of aged Ni-rich Ti-Ni alloys
- Influence of Heat Treatments on Mechanical Properties and Transformation Temperatures in Ti-Ni-Zr Alloys
- Quantifying the Metallurgist's Art through Fracture Mechanics
- The Fracture & Fatigue to a TiAl based material in microsized samples.
- Microtexture Formation in the Containerless Solidification of Undercooled Ni-Sn Eutectic Melts
- Ultra High Pressure Sintering of Intermetallics-free Mechanically Alloyed NbAl Intelligent Material with SPS
- In situ observation of magnetization process in Alnico magnets by electron holography and Lorentz microscopy
- Magnetic and Structural Properties of Co2MnSi Heusler alloy films
- Fabrication of Fine-Grained .BETA.-Type Titanium Alloy through Mechanical Alloying Treatment
- Microstructure Change during Warm Deformation in High Carbon Steels
- Effect of nitrogen on Hall-Petch coefficient in austenitic steel
- Effect of strain gradient on the formation of nanocrystalline structure
- Dynamic Recrystallization of Ferrite during Large Strain Warm Compression Of Ultra-Low Carbon Steel
137th
- Microwave Processing of Metallic Materials and Field Separation in Microwave Single-Mode Cavity
- Development of application research of MW in metallurgy and study reduction of metal oxides with MW heating
- Interfacial Precipitation and Strengthening of .BETA. phase in a Fully Lamellar TiAl+W Alloy
- Catalytic properties of oxidized Ni3Al foils for methanol decomposition
- Material Science of Multi-ferroics and ONR-MURI (USA) Project
- Thermal Cycling Behavior of Plasma Sprayed Segmented Thermal Barrier Coatings
- Analysis of electric potential in a W field emitter by electron holography
- 3D quantitative investigation of ductile fracture in cast Al alloys using synchrotron X-ray microtomography
- The Fatigue and Fracture of Microsized TiAl
- Pt-base superalloys: A 3-dimensional atom probe (3D-AP) analysis
- Deformation behavior of a new kind of disk alloys
- Evaluation of the Microstructure and Mechanical properties of Advanced Disc Superalloys
- Theoretical and Experimental Study on Phase Stability of U720LI Alloyed with a .GAMMA./.GAMMA. Co-Ti
- A Thermo-Mechanical Fatigue Mechanism in Single Crystal Superalloys
- The Activation Energies of Al and Re Interdiffusion in .GAMMA.-Phase of Ni-Al-Re System
- Experimental study on phase equilibria in the Ni-rich part of Ni-Ga binary system
- Thermodynamic Optimization of Ni-X (X=Bi, In, Sb) systems
- Thermodynamic Descriptions of the Fe-W-X (X: Co and Ni) Systems
- Effect of Temperature of Oxidation Behavior of WC-Co Hardmetal
- Preparation of Pd Alloy Membrane by Microfabrication Technology
- PCI Measurement of Ti(OBu)4-doped NaAlH4 Prepared in a Suspension
- Insight of the Real Catalyst in Ti-doped NaAlH4 as a Hydrogen Storage Material
- Hydrogen desorption and structural properties of Li-Mg-N-H systems with different ratio of LiH and Mg(NH2)2
- Synthesis of Oxide/Oxide Composites via Reactive Sintering
- FABRICATION OF FE-AL/TIC IN-SITU CERMETS AND THEIR MECHANICAL PROPERITIES
- Microstructural evolution of a 2219 Al Alloy during ECAE at 723K
- Formation range of nano-icosahedral phase in Cu-based glassy alloys containing noble metals
- Devitrification of Hf-Pd-Ni glassy alloy on heating
- Phase separation in Cu43Zr43Al7Ag7 bulk metallic glass
- Relation between thermal expansion coefficient and ductile-to-brittle transition temperature of Fe-based amorphous alloys
- Mechanical Properties and Corrosion Behavior of Cu-Hf-Ti-Nb Bulk Metallic Glass Composites
- Nanocrystal composite in Ni-Pb-P bulk glassy alloys with large plastic elongation
- Effect of Atmospheric Gas Parameters during Casting on As-Cast Structure and Glass Forming Ability in Several Glassy Alloys
- High glass-forming Ce-based bulk metallic glasses with low reduced glass transition temperatures
- Thermal Stability and Magnetic Properties of Gd-Fe-Al Amorphous Alloys
- Catalytic properties of Ni3Al powder for hydrogen generation by methane steam reforming
- Fabrication of IrAl composite by gelcasting technique
- Finding eutectic nuclei in unmodified and Sr modified hypoeutectic Al-Si alloys
- Solidification and Microstructure of Sn-0.7mass%Cu Alloys
- Crystallographic orientations of B4C-TiB2-SiC and TiC-TiB2-SiC directionally solidified eutectic composites
- A comparative EBSP study of microstructure from undercooled Ni-B alloys solidified on an ESL and an EML
- Texture development in AZ31 by uniaxial compression deformation at high temperatures
- Modeling of precipitation and Cr depletion profiles of Inconel 600 during heat treatments and LSM procedure
- The effect of hetero-valence dopant on the aging problem of ferroelectrics
- Unique hybrid doping effect on ferroelectric and electrostrain properties of BaTiO3 ceramics
- Shape memory behavior and internal structure of Cu added Ti-Ni-Pt thin films
- Anisotropy of Transformation Strain in TiNi Ultrafine Laminates
- Plate-like omega-phase in Ti alloys
- Understanding of multi-stage R-phase transformation in aged Ni-rich Ti-Ni alloys
- Nonexistence of order-disorder transition in Ti-Ni alloy
- Precipitation Behaviour in Isothermally Aged Ni-rich TiNiZr Alloys
- Frequency dependence of the "broad peak" in the internal friction of Ti-Ni-Cu alloys
- The role of defect dipoles in relaxor behavior of ferroelectrics
- Effect of Ga-doping on the crystal structure and thermoelectric properties of type-III clathrate compounds
- Relationship between X-ray Intensity and Bias on Al2O3 Surface during Low Energy Ga'+' irradiation
- Detection of point defects upon ion irradiation by means of precipitate coherency
- Effects of Neutron Irradiation on the Mechanical Properties of High-Cr ODS Steels
- Local Electronic Structure of Embedded Nano Cu Clusters in Fe
- Oxidation Characteristics of the TMS-82+.GAMMA..GAMMA.' tie-line alloys
- Initial Oxidation of Cu-Mg Dilute Alloys at 400.DEG.C.
- Mechanical properties and microstructure of a quasicrystal containing Mg-Zn-Al-Y alloy
- Isotropic deformation behavior in magnesium alloys containing quasicrystalline phase
- Analysis of psuedoelasticity mechanisms of pure magnesium by acoustic emission and microstructure observation
- Lotus-type porous nickel-free stainless steel with high temperature nitriding
- Effect of Si on microstructural characteristics and mechanical properties of Tn-Nb-Si alloys for biomedical applications
- Study of substrate rotation effect on growing .BETA.-FeSi2 by MBE
- ELECTRONIC STRUCTURE CALCULATIONS OF METAL-POLYMER INTERFACES
- Phase-field simulation of dragging of liquid Bi particles by grain boundary movement in Al-Bi system
- Spontaneous Room Temperature Growth of Pb Nano-wires from Leaded Brass Surfaces
- Mechanism of Magnetization Transition of a Obliquely Evaporated Tape Studied by Electron Holography and Computer Simulation
- Formation of multiply twinned L10-FePt nanoparticles
- Life prediction of Life Truck Leaf Chain
- The principles of nanostructuring of steel using SPD processing
- On the Mechanisms Governing the Special Properties of SPD Nanometals
- Microstructural Evolution in 7475 Al Alloy during Severe Warm Forging
- Tensile mechanical properties of ultra fine-grained magnesium alloys at high strain rate
- Seven Approaches to Improve the Tensile Ductility of Ultra-fine Grained and Nanostructured Metals
- EFFECT OF EQUAL CHANNEL ANGULAR PRESSING ON THE MECHANICAL PROPERTIES OF METALS
- Nanoindentation-induced deformation behavior in the vicinity of single grain boundary
- Size Effects in Plasticity: Experiments and Simulations
- Mechanical Properties of Nanocrystalline Al and Cu by Molecular Dynamics Simulations
- New Routes to Synthesize Massive Nanostructured Materials
- Role of strain gradient on the formation of nanocrystalline structure produced by severe plastic deformation
- Nanocrystalline structure formed on the worn surface in carbon steel
- Microstructural evolution of pearlite steel severely deformed by surface mechanical attrition treatment
- Grain Refinement During Severe Plastic Deformation of Steels
- Formation Mechanism of Five-fold Deformation Twins in Nanocrystalline fcc Metals
- Grain Refinement Using Torsion Straining Techniques
- Bulk nanocrystalline Fe-C steel processed by mechanical milling ans spark plasma sintering
- Microstructure evolution of mechanically milled martensite steel powder
- Grain Boundary Diffusion as the Controlling Mechanism of Ferrite Grain Size during Large Strain High Z Deformation in Low Carbon Steel
- Influence of Initial Grain Size on the Formation of Ultrafine Ferrite Structure during Large Strain High-Z Deformation in Ultra-Low Carbon Steel
- Mechanical Property and Microstructure of Copper Deformed by the ARB Process
- Determination of Plastic Working Limit by Circumferentially Notched Tension Test
- Effects of Temperature and Strain Rate on Stress-Strain Relation for Ultrafine-grained Steels
- Deformation of Nanocrystalline Al alloys investigated by Nanoindentation
- A Study on Compressive Deformation behaviors in Nanocystalline Al Alloys
- Fine-grained structures associated with deformation twin and its influence on tensile behaviors in cold-rolled ferrous alloys
| Copyright (c) 2006-2007 Japan Science and Technology Agency. All Rights Reserved. | |
