|
List of Jounal Titles
A to Z index of Journal Title. Choose a letter.
Abstracts. Meeting of JIM
130th
- 3DAP and HREM Characterization of RS P/M Nanocrystalline Mg97Y2Zn1 Alloys.
- Surface structure design by plasma nitriding technique towards automotive parts application.
- Thermodynamic Assessment of Au-In Binary Phase Diagram.
- Thermo-Mechanical Fatigue Behaviors of Two Third Generation Single Crystal Superalloys.
- Effect of Interfacial Dislocation Networks on Creep Properties of the 4th Generation SC Superalloy TMS-138.
- Deformation Behaviours of an Ir-Nb alloy at Ultra-high Temperature.
- High-temperature Creep Properties of Ir-Nb-Ni-Al Alloy.
- Gross primary creep strain in advanced Ni-based single crystal superalloys.
- Mechanical properties of Nb-18Si-5Mo-5Hf-2C in-situ composite prepared by arc-casting method.
- Atomistic structures of ion-implantation-induced amorphous silicon carbide characterized by electron diffraction.
- Oxidation of copper with different purities at 673-1073K.
- MD Simulation on the behavior of small dislocation loop during deformation.
- Material Analysis in Cultural Heritage.
- The substrate temperature effects on cBN thin film growth in ICP-CVD.
- Bulk and film properties of the thermoelectric materials in the Zn-Sb system.
- Influence of Addition of Phosphorous and Silver on the Microstructure and Thermoelectric Properties of (Bi0.2Sb0.8)2Te3 Alloy.
- Direct observation of the crystal growth transition in undercooled melt of silicon.
- Modeling of Si Cluster Growth and Transportation during Thermal Plasma Deposition Process.
- Study of Ohmic contact to p-ZnSe.
- Shape memory effect in pre-rolled Fe-Mn-Si-based alloys containing Nb and C Part 1: Fe-28Mn-6Si-5Cr-0.5NbC.
- Stress-induced Thin Plate Martensite Transformation and Shape Memory Effect in an Ausaged Fe-Ni-Co-Ti Alloy.
- The effects of V and Si additions on the coercivity and microstructure of nanocomposite Fe3B/Nd2Fe14B magnets.
- In situ observation of bubbles injected in molten aluminium.
- Formation, Thermal Stability and Mechanical Properties of Ti-Zr-Hf-Cu-Ni Bulk Glassy Alloys.
- Thermally-Enhanced and Mechanically-Induced Glass Formation Reactions in Multilayered Co75Ti25 Composite Particles.
- Formation of Bulk Glassy Ni-Based Alloys and Their Corrosion Behavior.
- Primary nanocrystallization of a metastable cubic phase in Cu-(Zr or Hf)-Ti metallic glasses.
- Effect of Additional Elements on the Corrosion Behavior of Cu-Hf-Ti Bulk Metallic Glasses.
- Formation and mechanical properties of Pd-Cu-Ni-P bulk glassy alloys containing nano-crystalline particles.
- Effect of C addition on the tribological properties of Ag matrix overlays for plain bearing applications.
- Comparison of mechanical and tribological properties of TiNx prepared by ECR sputtering and PVD methods.
- Preparation of Ag-Sn overlays for plain bearing applications by ECR sputtering.
- Purification of Copper by Plasma Zone Melting.
- Effect of boron addition on the mechanical properties of MoSi2 alloys.
- Tensile behavior of cold-rolled thin foils of binary Ni-Al base .GAMMA./.GAMMA.' alloys.
- Oxidation of a Microcrystalline NiAl Coating at 1000.DEG.C. in Air.
- Kinetics of Hydride Formation and Its Influence on the EAC Behaviour of Gamma TiAl.
- Containerless solidification of Al2O3-ZrO2 eutectic in an aero-acoustic levitator.
- Oxidation of Ti3SiC2 at 1000.DEG.C. in air.
- Large area deposition of SiC by thermal plasma PVD.
- Evaluation on the fretting fatigue of three biomedical Ti alloys.
- In Vitro Assessment of Titanium Foam for Bone Regeneration.
- Influence of Diffusion Treatments on Microstructure and Shape Memory Behavior in TiNi Foils Obtained by Ultrafine Laminates Method.
- Hydrogen Effects on Dislocation Kink-Pair Energetics in Body-Centered-Cubic Iron.
- Thermal stability of bulk cementite.
- Nanoferrite formation and cementite dissolution in steels during heavy deformation.
- Ultrafine Grain Formation in an Al-Mg-Sc Alloy during Equal Channel Angular Extrusion.
- EBSD Study of Microstuctural Evolution Developed in 7475 Al Alloy during Hot ECAE.
- In situ SEM Observation of Fracture Process in Thermal Barrier Coatings.
- Development of Fe-Al Intermetallic Alloys for Automotive Brake Rotor Application.
- Interfacial characterizations and their effects on the mechanical properties of advanced Tyranno-SA and Hi-Nicalon fibers reinforced CVI-SiC/SiC composites.
- Fracture Resistance of Glass Matrix Optomechanical Composite Reinforced With Al2O3-ZrO2 Minicomposite.
- Heat Exposure Effects on Mechanical Properties of Al2O3 Fiber-Reinforced Al2O3 Matrix Composites.
- Transformation of hydrides in the Ti-Al-Nb alloys.
- Surface Modification of Amorphous MgNi Electrode by Aromatic Compounds.
131st
- Domain structure of Fe84Nb7B9 nanocrystalline soft magnetic materials.
- Influence of Siliconizing on the Oxidation Behavior of a .GAMMA.-TiAl Based Alloy.
- Hybrid quantum mechanical/molecular dynamics simulation of stress corrosion cracking in Si.
- Study of sulfurization of TiO2 nanoparticles by carbon disulfide.
- Microstructure and Tensile Properties of Cold-rolled Thin Foils of Binary Ni-Al.GAMMA./.GAMMA.' Alloys.
- Yield Strength Anomaly in Low Symmetry Crystals.
- High Strain Rate Superplasticity in Ceramic Particulate Reinforced Aluminum Matrix PM Composites.
- Microstructure and Mechanical Properties of Ti-Al-W-C Intermetallic Composites Produced by Reactive Arc-Melting.
- Greenness Assessment of Products in PLCA by DEA Approach.
- Corrosion Behavior of Mercury-Free Zinc Powder for Alkaline Battery use.
- State of the Art of EcoMaterial R&D in China.
- Tribological properties of Ag matrix composite overlays prepared by ECR-DC sputtering.
- Microstructural Dependence of Mechanical Properties of Mg2Si/MgO/Mg Composites on the Route of Hot Extrusion.
- Aluminum Foams Produced by SPS-L Method.
- Fabrication of high quality SiC/SiC composites by CVI process.
- Thermal Damage Behavior of (Al2O3f-ZrO2)mc/Al2O3 Composite.
- Analysis of Minicomposite Unit Bridging in a Brittle Matrix Optomechanical Composite.
- Prediction of thermal conductivity of composites.
- Characterization of the Mechanical properties of Refractory Metal base In-Situ Composite.
- Sintering of cellular materials by SPS method.
- Thermoelectric properties of ReSi1.75 based silicides.
- Zn4Sb3 thin film with a high figure of merit.
- Effect of doping on thermoelectric properties of .BETA.-Zn4Sb3.
- Is there a Hidden World of New Materials and Effects between the Elements of the Periodic Table.
- An Assessment of Ir-Nb-Pt-Al Quaternary Alloys for Ultra-high Temperature Applications.
- Superdislocations related to gamma prime cutting in a fourth generation superalloy TMS-138.
- Microstructural studies of a Single-Crystal Superalloy TMS-75 after thermo-mechanical Fatigue.
- Synthesis and Properties of Ir-23.9at % Ta Coatings on Nickel Base Single Crystal Superalloy TMS-75 Substrates Prepared by DC Magnetron Sputtering.
- Effect of Purity on Initial Oxidation of Copper.
- Steam Oxidation Resistance of HVOF Thermal Sprayed Ni-Cr Coatings.
- Effect of Thermal Sprayed Al on the Steam Oxidation Resistance of 9Cr-1Mo Steel.
- Thermodynamic Calculation of Cu-Ni-Zn System.
- Optimum growth conditions for CdTe/Si(111) Hot Wall Epitaxy.
- Annealing effect of ZnSe:Bi grown by vertical Bridgman method.
- Electron-irradiation-induced amorphization of silicon carbide.
- Study on oxidation behavior of V-Cr-Ti alloys.
- Influence of Environmental Conditions on Swelling Behavior in Irradiated Austenitic Stainless Steels.
- Effect of Wet/Dry Repetition on Reactivation/Repassivation Process during Atmospheric Corrosion of Low Alloy Steel.
- Effect of carbon on deformation and work hardening behavior in martensitic stainless steels.
- Fabrication and mechanical properties of Mo2B5-MoSi2 composites.
- Hydrogenation behavior of Zintl compound SrAl2.
- Effects of Pd addition on the electrochemical properties of MgNi.
- Preparation of Pd-Ag Overlayer on V-15Ni Alloy Membrane by Multi-Target DC Sputtering.
- Hydrogen Effects on Dislocation Cross-Slip Energetics in FCC Ni.
- Characterization and Visualization of Deformation in Atomistic Model.
- Effect of Cr on hydrogen environment embrittlement of Fe-Cr alloy.
- TEM observation of Fe-28Mn-6Si-5Cr-0.53Nb-0.06C shape memory alloy.
- Structure of an Approximant Phase in a Au-In-Yb Alloy Studied by Electron Diffraction.
- Glass-forming Ability of Hf-Cu Based Alloys.
- Effect of operating parameters on the structural and magnetic properties of electrodeposited Co-Ni-P alloys.
- Supercooled liquid region, devitrification behaviour and mechanical properties of Cu-(Ni,Co)-Zr-Ti bulk glassy alloys.
- Effect of Additional Elements on the Corrosion Behavior of Cu-Zr-Ti and Cu-Hf-Ti Metallic Glasses.
- Formation and Corrosion Behavior of Bulk Glassy Zr-Al-Co-Nb Alloys.
- Relationships Of Nano-Particles Of Icosahedral Quasicrystal With The Matrix And Other Phases In Dilute Mg-Zn-Y Alloys.
- Structure and Composition of Precipitates in a Mg-RE-Zn-Zr Alloy.
- Microstructure and mechanical properties of rolled Ti-Si-B alloy.
- Magnesium alloy AZ31B as an antibacterial candidate material: Laboratory studies using biofilm forming bacteria Pseudomonas sp.
- Temperature effect on microstructure development in 7475 Al alloy during ECAE.
- Ductility Increase during ARB Process in Al-Fe-Si Alloy.
- Grain Refinement in As-Cast 7475 Aluminum Alloy under Hot Deformation.
- Structural changes during annealing of mechanically milled Fe-0.6%O powders.
- Effect of boron on eutectic modification of hypoeutectic Al-Si alloys.
- Evaluation of silicon twinning in hypoeutectic Al-Si alloys.
- Effect of gas bubbling conditions on the grain refinement in AC4CH cast aluminum alloy.
- Long jump of Pd on W (110).
- Centrifugal Slip Casting Processing and Properties of Al2O3/ZrO2(3Y) Composites.
- Spark Plasma Sintering of Silicon Oxynitride Ceramic.
- Fracture Behavior in Thermal Barrier Coatings under Mixed Loading Mode.
- Structure and Electrical Properties of the Sintered Bi-Sb-Te-M Alloys.
- Effects of high magnetic field on alignment of transformed phases in Fe-based alloys.
- Atom Probe Study of the Microstructure of Sintered Sm(Co0.72Fe0.20Cu0.055Zr0.025)7.5 Permanent Magnet.
| Copyright (c) 2006-2007 Japan Science and Technology Agency. All Rights Reserved. | |
